2020-07-001: Preinfusion Solenoid Change, LP

• Related Articles

• 2020-03-001 Regulator Change, LP

  Please see the PDF attached for details on the LP regulator change

• Replace Pre-Infusion Solenoid Slayer Steam LP

  Replace Pre-Infusion Solenoid Slayer Steam LP Time Needed: :30min - 1:00hr Tools Needed: Adjustable wrench, #2 screw driver.  Turn off the machine, unplug from power source.  Turn off water.  Raise hood of the machine Open Drain Line for group being ...

• Pre-Infusion Solenoid Troubleshooting - Steam LP

  Pre-Infusion Solenoid Troubleshooting - Steam LP Slayer recommends that all service be performed by an experienced Slayer Espresso trained technician. Slayer Steam LP's Pre-Infusion solenoid is a 24v DC 3-way solenoid which enables a group to ...

• Long Backflush Procedure - Universal

  Long Backflush - Unclogging Brew Solenoid SLAYER Espresso Machines feature 24vDC 3-Way Solenoid Valves on each group head. The valves are located off the rear of the group neck and are the main gateway for water flowing through the brew circuit. ...

• Cleaning Inlet (Autofill) Solenoid Valve, Steam Series

  Slayer Steam X, LP, and EP Remove inlet (autofill) assembly to clean debris preventing solenoid closure. Common Causes: Particles from incoming water line due to poor filtration. Carbon from improperly flushed filters. It is recommended during ...