Cleaning Drain Box, Single Group

Cleaning Drain Box, Single Group

Cleaning Drain Box

Time: 5-10 minutes

Tools Needed: #2 Phillips Screwdriver 
                         Pick 
The reason for leaking from the front left corner is likely caused by blockage of drain box tube, which located between machine and drip tray.  In order to clear the clog, Follow these instructions: 
 - Remove your cup tray cover 
-  Remove top front panel by using screwdriver 
  

-  Look for the drain box (See pic below), and see if the water level is too high.  
 

- If yes, there is a block which can be cleaned by using a pick.  Remove drip tray cover and look for the drain box tube (Black tube). Insert a pick into the drain tube, careful not to break the tube. Remove and reinsert 4 times to clear anything out. After tube been cleaned, please turn paddle to left position for test. 
 

    • Related Articles

    • Adjusting Drain Box to Drip Tray Tube, Single Group

      Adjusting Drain Box to Drip Tray Tube Single Group Tools Needed: 2 - 7/16" wrenches (we used a box wrench and a socket, but two box wrenches or crescent wrench will work), pliers, lubrication. Remove cup tray cover Remove the 4 - 7/16" bolts on the ...

    • Drain Single Group (Video)

      Click link to watch video on how to drain the Slayer single group  Drain Single Group (Video)

    • Cleaning Drain Box, Single Group

      Time Needed: 5-10 Minutes Parts Needed: None Tools Needed: #2 Phillips Screwdriver                           Pick Step 1: Remove the cup tray cover and set aside. Remove top front panel by unscrewing 4 screws and set aside Step 2: Look into the drain ...

    • Preventative Maintenance and Cleaning Procedures, Single Group

      Single Group Cleaning and Preventative Maintenance Cleaning and Preventative Maintenance (PM): What is preventative maintenance and how does it differ from changing major parts? Similar to changing the oil in your car, PM is routine maintenance to ...

    • Panel Installation - Single Group

      Single Group Panel Installation Slayer recommends that all service be performed by an experienced Slayer Espresso trained technician. Objective: Install and remove panels for maintenance, service, and panel replacement. Please contact Slayer Tech ...