Heli Coil for Steam Tank High Limit Replacement
Helicoil repair for damaged threads on Steam tank High Limit.
Tools Needed:
M4x/0.7 Helicoil Kit
11/64 Stainless Steel Drill Bit
Metal cutting Lube
Drill
Center punch
Link to where we sourced the product.
Use center punch to create a divot in the sheered off stem inside the tank.
Gauge the depth needed to drill by marking off with tape on the drill bit.
Only drill as deep as the high limit housing.
Using the drill bit, slowly drill out the hole.
Use the Helicoil kit instructions to clean, re-thread, and insert the Helicoil
Add a small application of thermal paste to the base and threads of the High Limit Thermostat.
Install finger tight.
Questions or concerns? Please contact: support@slayerespresso.com
Related Articles
Checking Steam Tank High Limit Single Group
Checking Steam Tank High Limit Single Group Tools Needed: Multimeter, #2 screwdriver Time Needed: 10 min Turn off machine and unplug from power Remove cup tray Remove front top panel Remove leads to high limit Check continuity between the poles View ...Replacing High Limit Switch (limit thermostat)
Tools Needed: #2 screwdriver Time Needed: Less than 10 minutes Remove top front panel Remove wires from high limit switch Remove the high limit switch. The high limit switch is a brass fitting that screws into stainless steel. It is very fragile and ...Changing Brew Element, Steam Series
Step 1: Remove top front panel and lower front panel 1. Turn off the main breaker (high voltage) and main power switch (main power, covered by rubber gasket). Unplug the power cord from the wall. Turn off water at water source. 2. Remove the cup ...Testing High Limit Switch on Brew Tank, Universal
Time Needed: 5 Minutes Tools Needed: Multimeter, Screwdriver Parts Needed: Thermostat, 110C 30000-20251 Need to purchase these parts? Download the pre-filled order form and submit a ticket with the PDF attached. Step 1: Remove cup tray. Step 2: ...Thermal Paste Application - Universal
Thermal Paste Application - Universal SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email ...