Remove Electronics Panel - V3
Dropping Electronics Panel - Espresso V3 (Video)
SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email support@slayerespresso.com.Objective:
SLAYER Espresso V1 - V3 machines feature an electronics panel located underneath the spar. Protected by a heat shield and attached by several mounting points, a specific order of operations is required to access the panel. Please review the video below to properly remove the electronics panel and heat shield in order to service.
Additional Resources:
Once panel has been removed. Refer to the guides below for era-specific V3 electronics panel layouts:
Questions or concerns? Please contact support@slayerespresso.com
Related Articles
Electronics Panel Layout - V3
Espresso V3 Electronics Panel Layout Date of Manufacture 10/2022 - Current Rev SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at ...Electronics Panel Layout - V3 (Legacy)
Espresso V3 Electronics Panel Layout - (Legacy) Date of Manufacture ~2015 - 10/2022 SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at ...Panel Installation - Single Group
Single Group Panel Installation Slayer recommends that all service be performed by an experienced Slayer Espresso trained technician. Objective: Install and remove panels for maintenance, service, and panel replacement. Please contact Slayer Tech ...Removing Panels V3
Removing Panels V3 Time Needed: 1-2 Hours Tools Needed: #3 flat head screwdriver, #2 Phillips screwdriver, #2 Stubby screw driver, Crescent wrench Turn off the machine, Unplug from wall Turn off water to the machine Open steam valve to drain all ...Panel Alignment - Espresso Single Group
Espresso Single Group Panel Alignment Effective October 2022 - Present SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at ...