Removing Touch Screen, Compak

Removing Touch Screen, Compak

Removing Touch Display

Tools Needed: None

Time Needed: 2-3 Minutes


Step 1:  Squeeze on either side of the collar. The bottom tab of the display will pop up. 



Step 2: Lift display and turn over



Step 3: Locate both wire connections



    • Related Articles

    • Contrast Adjustment LCD Single Group Display

      Time Needed 15 minutes Turn off the machine Follow instructions on removing single group display from back panel.  Single Group Display Removal and Replacement With the display removed, plug back into the machine and power on.  Be sure to not let the ...

    • Replacing Slayer Steam Display Screens

      Step 1: Turn off machine and unplug from power We will need to “raise the hood” for the top cover. Lower the actuator handles, remove the screws that attach the top cover to the body, turn the steam wands and hot water wands to face the inside of the ...

    • Display Operation - Single Group

      Slayer Single Group Display Operation Objective: Navigate touch operations of LCD display. Parts: 99004-60120 DISPLAY ASSEMBLY, HOME Tools: Pad of your thumb. The operation of the single group display is best described in the video below. Using as ...

    • Operation and Understanding of Single Group Display

      Using the full pad of your thumb and slow and very deliberate on touching or scrolling the screen. See the pictures of where the sensors are and the picture of the screen without the glass. Pausing a beat when touching or scrolling is advised. You ...

    • Replacing Display Glass, Steam Series

      Slayer Steam X, LP, and EP Removing and replacing Display Glass and VHB adhesive. Steam LP and EP. It is imperative that the OLED Display Assembly Screens (30005-60110) be removed before applying the heat required to safely remove old display glass. ...