Password Reset - Steam Series

Password Reset - Steam Series


Password Reset - Steam LP & EP 

 
Advanced Menu:
  1. Steam LP: 7 7 7 7 7 7 7  (seven 7's)
  2. Steam EP: SEATTLE7 

Default Password:
  1. Manager - 1 1 1 1
  2. Advanced - 1 2 3 4

Step 1:
From the Menu press the encoder knob to jump to Enter Password, or scroll to Enter password.





Enter the override password:
  1. Steam EP: SEATTLE7

  1. Steam LP: 7 7 7 7 7 7 7


Step 2:
This will enter you into the Advanced Menu where you can scroll to enable or disable the passwords


  1. Manager Default: 1 1 1 1

  1. Advanced Default:1 2 3 4



Questions or concerns? Please contact support@slayerespresso.com

    • Related Articles

    • Reset Factory Default - Steam Series

      Reset Factory Default - Steam X, LP, & EP SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email ...

    • Hard Reset - Single Group

      Hard Reset, Single Group Step 1: Press circle to enter programming Scroll to Advanced Settings and circle to enter Scroll to menu option Save/Restore settings, press circle to enter Arrow up to Reset Factory Default Press circle, arrow to yes, press ...

    • Steam Actuator Adjustment - Steam Series

      Adjusting Steam Actuator - Steam Series Objective: Slayer magnetic steam actuators have two positions: Up is a rinse that should bounce back to the off position. On is a continuous steam actuation. The actuator should index in the center and now ...

    • Error Code Identification - Steam Single

      Steam Single Error Code Identification 015 - Reservoir Low Water Level Machine software detected a condition of low water level in the reservoir. 016 - Brew Actuator Position Error Software detected an electronics failure of actuator switch contact. ...

    • Error Code Identification - Steam Series

      Steam X, EP, & LP Error Code Identification SLAYER Steam Series feature error codes which correspond to the affected hydraulic or electrical circuit. There error codes help isolate further troubleshooting measures. Error codes replace the temperature ...