Single Group Uncrating

Single Group Uncrating




A QR code can be found on the crate of your new Single Group. Please take a moment to review the instructions detailed in the link and in the video below. 

Slayer Single Group

Questions and concerns? Please contact: support@slayerespresso.com

    • Related Articles

    • Drain Single Group (Video)

      Click link to watch video on how to drain the Slayer single group  Drain Single Group (Video)

    • Uncrating Slayer Single Group

      Just got your machine? Excited to bust it out of the crate and start brewing espresso? The guide below will walk you through uncrating your Slayer Single Group.  Slayer Single Group

    • Single Group Internal Diagram

      1. 3-Way Brew Solenoid 8. Vacuum Breaker 2. Needle Valve 9. Pressure Relief Valve 3. Inlet (Autofill) Solenoid 10. Brew Gauge 4. Steam Valve 11. Expansion Valve 5. Hot Water Valve 12. Steam Tank Ball Valve, Drain 6. Transducer 13. Brew Tank Ball ...

    • Diagnosing SSR Single Group

      Diagnosing SSR Single Group Tools Needed: Voltage meter Remove cup tray and back panel of the machine, being aware of the ribbon cable attached to the control board. Leave the ribbon cable attached and lean the back panel on the machine giving you ...

    • Single Group Electronics Identification Diagram

      2020 Single Group 1. Display Ribbon Cable 7. Group Cap Magnet Switches 2. Relay Harness 8. Steam Tank Level Probe 3. 24v DC Power 9. Transducer 4. Pump 10. SSR Steam Relay 1 5. Solenoids 11. SSR Steam Relay 2 6. Brew Tank RTD 12. SSR Brew Relay If ...