Slayer Steam Hot Water Button Not Working

Slayer Steam Hot Water Button Not Working

 Slayer Steam Hot Water Button Not Working

1. Verify that the button is connected


2. Verify the button is not loose from the assembly


3. Raise the hood of the machine
4. Verify the button is seated properly in the carriage


    • Related Articles

    • Blending Hot Water Mix Valve - Steam Series

      Adjusting Hot Water Spout Temperature: Steam X, EP, & LP SLAYER Steam Series machines feature a hot water mix valve which blends low pressure (line pressure) inlet water with hot (steam tank) water. The mix valve is a 24vDC solenoid valve and is ...
    • Hot Water Mix Valve Troubleshooting - Steam Series

      Hot Water Mix Valve Troubleshooting: SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email ...
    • Catch Test - Steam Series

      Clear Water Catch Test - Steam LP & EP SLAYER calculates the flowrate (water debit) of Steam Series machines by measuring the dispensed amount of water, in grams (milliliters), against time, in seconds. Measuring flowrate allows a technician to ...
    • Slayer Board Wiring - Steam Series

      Control board wiring diagrams for Slayer Steam Series. These schematics can be used for identifying control inputs and for reference when replacing the board. *Steam X board wiring can be referenced by the Steam EP drawing.* Questions identifying a ...
    • Steam Actuator Stack - Espresso Series

      Actuator Stack - Espresso V3 & Single Group SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or ...