Uncrating Slayer Steam

Uncrating Slayer Steam

Just got your machine? Excited to bust it out of the crate and start brewing espresso? The guide below will walk you through uncrating your Slayer Steam. 

Slayer Steam

    • Related Articles

    • Uncrating Slayer Single Group

      Just got your machine? Excited to bust it out of the crate and start brewing espresso? The guide below will walk you through uncrating your Slayer Single Group.  Slayer Single Group

    • Uncrating Slayer V3

      Just got your machine? Excited to bust it out of the crate and start brewing some espresso? The guide below will walk you through uncrating your Slayer Espresso V3. Slayer Espresso V3

    • Reservoir Magnet Switch Bracket - Steam Single

      Field technicians guide for E015 fault. SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email ...

    • Replacing Slayer Steam Display Screens

      Step 1: Turn off machine and unplug from power We will need to “raise the hood” for the top cover. Lower the actuator handles, remove the screws that attach the top cover to the body, turn the steam wands and hot water wands to face the inside of the ...

    • Steam Actuator Adjustment - Steam Series

      Adjusting Steam Actuator - Steam Series Objective: Slayer magnetic steam actuators have two positions: Up is a rinse that should bounce back to the off position. On is a continuous steam actuation. The actuator should index in the center and now ...