Verify Firmware - Steam Series

Verify Firmware - Steam Series


Verify Firmware - Slayer Steam X, EP, & LP


Objective:
Identify operating firmware for diagnosis, hardware compatibility, and machine features.

There are several hardware retrofits, improvements, and bug fixes which come as a result of upgrading firmware. Notable updates include:
  1. Original Slayer Steam Vaporizer removal.
  2. Honeywell to Eltek transducer retrofit.
  3. Display OFF feature.
Time:
5 minutes
Current firmware versions:
Steam LP: 1.22
Steam EP: 1.10
Steam X: 1.07
Step 1:
This step happens quickly!
  1. Power cycle machine by turning the main power rocker switch OFF & ON.
  2. The switch is located under the bottom right side of the machine from the barista point of view.


  1. With eyes on the Group 1 display.
  2. A brief prompt will flash on display:
    1. Firmware Version
    2. Group Number
    3. Serial Number



Questions or concerns? Please contact: support@slayerespresso.com

    • Related Articles

    • Firmware Update - Steam Series

      SLAYER Firmware Update Guide Revised 8/16/2024 Review guide in full before attempting firmware update! SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please ...

    • Reset Factory Default - Steam Series

      Reset Factory Default - Steam X, LP, & EP Slayer recommends that all service be performed by an experienced Slayer Espresso trained technician. Resetting to factory default will reset all personal settings. Scroll through the menu settings and record ...

    • Steam Actuator Stack - Espresso Series

      Actuator Stack - Espresso V3 & Single Group SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or ...

    • Steam Actuator Adjustment - Steam Series

      Adjusting Steam Actuator - Steam Series Objective: Slayer magnetic steam actuators have two positions: Up is a rinse that should bounce back to the off position. On is a continuous steam actuation. The actuator should index in the center and now ...

    • Error Code Identification - Steam Series

      Steam X, EP, & LP Error Code Identification SLAYER Steam Series feature error codes which correspond to the affected hydraulic or electrical circuit. There error codes help isolate further troubleshooting measures. Error codes replace the temperature ...