Cosmetic Panel Anomaly - Steam Single

Cosmetic Panel Anomaly - Steam Single


Rear & Side Panel Surface QA Resolution - Steam Single

AlertSLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email support@slayerespresso.com.

Known Issue:
Reports of light-cosmetic surface anomalies affecting rear and side panels (green rectangle) on the SLAYER Steam Single. 



Resolution Measure:
SLAYER recommends resolution measure only be applied by the original Distributor Partner or authorized technician per SLAYER's Warranty Policy.  In all cases, please report issue via the Warranty Form.

Tools:
  1. Clean Microfiber Cloth
  2. Acetone
    1. Diluted Acetone works well too.

​
Step 1 - Clean Surface:
  1. Confirm surface is clean of any dust or physical particles.
    1. Wipe and clean prior to applying resolution measure.
Step 2 - Apply Acetone:
  1. Apply small amount of Acetone to microfiber and gently wipe in concentric circles with an open hand.
    1. Think cleaning a window!
Warning
Do not apply focused pressure to a specific area!
​
Troubleshooting:
If issue persists or other concerns are present. Contact SLAYER Support at support@slayerespresso.com or 206 284 7171 (#1 in Directory) for additional troubleshooting.


Questions or concerns? Please submit a SLAYER Support Ticket.