SLAYER Steam Decal - Steam Series

SLAYER Steam Decal - Steam Series

Steam EP, LP, & Single Decal - Application Guide



SLAYER Steam Series machines feature a script decal on the left rear panel. Applied in the factory or offered as a spare part, the guide below details decal placement.

Parts:
  1. 24005-10011 Steam Decal, Black 
    1. Black & Anodized Steam EP
    2. Black Steam LP
    3. Steam Single
  2. 24005-10010 Steam Decal, Clear 
    1. Bone Beige LP
    2. White LP
    3. Turquoise LP
    4. Mirror LP
Application:
Warning
Clean panel surface prior to adhering decal!
  1. SLAYER Cosmetic Care Guide 

AlertSLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or email support@slayerespresso.com.



Questions or concern? Please contact SLAYER Support at support@slayerespresso.com or call 206 284 7171 (#1 in Directory).
    • Related Articles

    • Fading Display - Steam Series

      Fading Display - Steam Series SLAYER Steam Series machines feature OLED displays which illuminate the barista dashboard and present information regarding the status of your machine. Known Issue: Pixels begin to fade after years of use. OLEDs can not ...
    • Flowmeter Not Reading Output - Steam Series

      Flowmeter Not Reading Output - Steam Series SLAYER recommends all service be performed by an experienced SLAYER Espresso trained technician. For a technician reference near you, please contact SLAYER Support at (206)-284-7171 (#1 in Directory) or ...
    • Catch Test - Steam Series

      Clear Water Catch Test - Steam LP & EP SLAYER calculates the flowrate (water debit) of Steam Series machines by measuring the dispensed amount of water, in grams (milliliters), against time, in seconds. Measuring flowrate allows a technician to ...
    • Steam Actuator Adjustment - Steam Series

      Adjusting Steam Actuator - Steam Series Objective: Slayer magnetic steam actuators have two positions: Up is a rinse that should bounce back to the off position. On is a continuous steam actuation. The actuator should index in the center and now ...
    • Error Code Identification - Steam Series

      Steam X, EP, & LP Error Code Identification Error codes replace the temperature and/or pressure value (observed on the display) of the faulted circuit. Brew Circuit AL1: Group temp probe (thermistor) is interrupted or disconnected. Disables group's ...