Slayer Cosmetic Care Instructions - Universal

Slayer Cosmetic Care Instructions - Universal


Cosmetic machine care instructions. 



WARNING! Harsh chemicals or solvents can discolor or damage the finish on powder coated, wood, phenolic and Duratex surfaces. Abrasives, even soft plastic, can leave light scratches in powder coating, aluminum, stainless, copper, gold, wood, phenolic and Duratex surfaces.

Powder Coating: 
  1. Microfiber towel + mild cleanser, soap & water. 
  2. Denatured alcohol, rubbing alcohol, or paint-safe degreaser for deep cleaning/degreasing.
  3. Same as automotive paint care/products.
Bare Metal, Plated, Anodized:
Stainless steel, aluminum, chrome, copper, nickel, 24k gold.
  1. Microfiber towel + window cleaner to clean.
  2. Meguiar’s Quick Wax (or similar high quality automotive spray wax) to polish. 
  3. Do not use polish on textured or anodized surfaces.
Wood finish:
Brew & steam actuators, portafilter handles, side panels.
  1. Microfiber towel + mild cleanser or sanitizing solution. Dry immediately! 
  2. Never submerge any wood components or leave excess moisture on wood. 
  3. Never put any wood components in the dishwasher. 
  4. Buff with OSMO Polyx-Oil (satin) or mineral oil to repair scratches or discoloration.
Phenolic & Duratex:
Brew & steam actuators, portafilter handles.
  1. Microfiber towel + mild cleanser. 
  2. Denatured alcohol or rubbing alcohol for degreasing.
  3. Buff with mineral oil for scratches or dull discolored spot.
Questions or concerns? Please contact support@slayerespresso.com

    • Related Articles

    • Slayer Crating Guide - Universal

      Slayer Uninstall & Recrating Guide 2023 Only qualified service personnel should uninstall Slayer espresso machines. For a list of certified Slayer technicians near you please contact our support department. Incorrect uninstallation may result in ...

    • Slayer Espresso User Manuals

      User Manuals for Slayer Steam Series, V3, and Single Group. Updated October 2022 Questions regarding install, technical support, or part identification? Please contact: support@slayerespresso.com Pricing guides and part orders. Please contact: ...

    • Panel Alignment - Single Group

      Slayer Single Group Panel Alignment - 2023 Model Slayer recommends that all service be performed by an experienced Slayer Espresso trained technician. Purpose: Re-align side panels to base plate. Commonly caused by rough transit or loose bolts. ...

    • Slayer Torque Specifications

      Slayer Espresso & Steam Series Slayer recommends that all service be performed by an experienced Slayer Espresso trained technician. Universal Brew and Steam Tank Elements 18 Foot Lbs Espresso V3 Pre-Heat Element 32 Foot LBS 6 wraps of Teflon tape ...

    • Routine Backflush - Universal

      Backflush Procedure Backflushing your SLAYER Espresso machine is imperative to routine brew group maintenance. Daily backflushing, + a quick scrub, cleans the group of residual coffee and coffee oil build up. Further reducing excessive wear on ...